My iRig keys IO 49 expression pedal not working as it should be.
not able to figure out what is wrong...
I am trying to control the wah pedal in Amplitube 4
When i use midi learn for the Wah pedal, It shows CC64 which is sustain and not CC07 or CC11 as it should be for an expression pedal.
I even tried changing the CC number in the Keyboard using the following steps:
5.3.3.1 Assign CC to the expression pedal ( from the User manual)
• Enter Edit Mode by pressing the ALT and EDIT buttons;
• The display will show GLO. Rotate the DATA knob until you reach the PRE position. Press the DATA pushknob
to confirm you want to edit a parameter in the preset menu;
• The display will show DTA. Rotate the the DATA knob clockwise to reach the PED position;
• Reached the PED position press the DATA push-knob;
• The display will show EXP (expression). Press the DATA push knob to confirm you want to edit the message
sent by the Expression pedal;
• The display will show NBR (number) to let you insert the CC number you want to assign to the knob;
• Insert the MIDI control change number (from 0 to 127) with the keys marked from 0 to 9. You can cancel
your input with the CANCEL/NO key;
• To confirm press the DATA push-knob;
• The keyboard will exit automatically the Edit Mode;
• You can exit the Edit mode any time by pressing the CANCEL/NO key
Still the CC remains as CC64 !!!
The pedal used is: Bespeco VM18L
This pedal works fine with yamaha, Roland and other controllers.
I am Running Amplitube 4 Standalone
Windows 7 64 bit
Please Help..... Maybe i am doing something wrong...
