UNO Synth...hold OSC [RESOLVED]

[XTN-LCH]

what is this parameter for?...every time I twiddle the 4th knob in the OSC blinky mode all the display sez is UNO & then blinks as I'm obviously doing something worng

[Ryan_IK]

When you press the OSC button and hold down for a moment, the OSC button will begin to blink allowing control of the Level 1 (OSC 1), Level 2 (OSC 2), and NOISE oscillator level using the 4 knobs on the left side of the UNO Synth. The "Hold OSC" is just letting you know how to access the functions to the left of the "<" symbol. When turning any knob not associated with a control on the UNO Synth, the display will read UNO. This is because nothing is being controlled.

[XTN-LCH]

why not have the unused controller modulate the OSC from the Filter ADSR in a future firmware update?

[Ryan_IK]

That is an interesting request. Please feel free to post to the official request.

https://cgi.ikmultimedia.com/ikforum/viewtopic.php?f=43&t=19869

As this thread has been resolved for the original poster it will be marked as such and locked to keep the forum tidy.

• If you are the original poster and wish to add a comment please ask a Moderator to unlock the thread.
• If you are reading this thread because you are having similar issues or have questions of a related nature, please feel free to start a new topic. Remember that similar symptoms do not mean the same problem or solution.