by Ivenado » Tue Jan 22, 2019 2:44 am
2. Download and launch the AmpliTube App.
3. Connect a microphone or an instrument to the input combo jack. If the microphone you are using requires
external phantom power, activate the 48V switch. Adjust the input level with the gain potentiometer.
4. Connect a mixer, an amplifier or a PA system to the stereo line outputs. It is possible to control the output
volume with the Volume potentiometer on the top panel.
5. Connect your headphones to the headphone output. It is possible to control the output volume with the
Volume potentiometer on the top panel.
6. If needed, connect up to two footswitch/expression pedals to the TRS connector on iRig Stomp I/O.
7. If needed, you connect external MIDI devices to the physical MIDI ports (Input/Outp2. Download and launch the AmpliTube App.
3. Connect a microphone or an instrument to the input combo jack. If the microphone you are using requires
external phantom power, activate the 48V switch. Adjust the input level with the gain potentiometer.
4. Connect a mixer, an amplifier or a PA system to the stereo line outputs. It is possible to control the output
volume with the Volume potentiometer on the top panel.
5. Connect your headphones to the headphone output. It is possible to control the output volume with the
Volume potentiometer on the top panel.
6. If needed, connect up to two footswitch/expression pedals to the TRS connector on iRig Stomp I/O.
7. If needed, you connect external MIDI devices to the physical MIDI ports (Input/Output
Hello,
I did connected from cable to usb computer but no sign of the pedalboard. The picture shows a cable from Irog to computer but their should be something connecting to the audio interface. I don't see anywhere in my computer the irig or in Logic Pro Plugin?
TY