Will Stomp I/O control Bias FX

[alderre]

If so, take my money.

[Peter_IK]

iRig Stomp I/O is a MIDI interface so any software that accepts MIDI messages for control will work. Though it comes with AmpliTube 4 Deluxe which is worth a lot and sounds great (due to IK's long heritage of amp modeling prowess).

[annamalay]

Yes.

I’ve posted this copy on a number of threads as it is relevant.

I like it. I tested it on JamUp on my IPhone 5 and it worked great during rehearsal.

It work with Bias FX, ToneStack etc. Just need to set the CC in the effects apps directly to match the Stomp IO.

There is an issue trying to engage The hold on button 3 CC (32). It doesn’t work first up in other effects.

The work round is to use AmpliTube and turn on tuner using hold+Button 3. Close AmpliTube and then it works in BiAS FX, JamUp etc. Don’t forget to set the tuner to CC32 in those apps.

It also doesn’t charge my IPad Pro 10.5 and 12.9. Not sure if it’s an IOS 11.x issue. My IPhone 6 Plus doesn’t charge either. It’s on 11.x

The IPhone 5 charges fine it’s on 10.x

[Peter_IK]

Please report any charging issues to the IK Support team and they will assist you directly.

[annamalay]

Please report any charging issues to the IK Support team and they will assist you directly.

Done

[redroc.k]

Hi annamalay, configuring MIDI is completely new to me, but I’m working through getting the stomp i/o and bias fx to work together one switch at a time using the MIDI learn function.

There are a few things I can’t figure out, have you been able to make these work, and if so, how?

- Have you been able to assign a volume pedal to the i/o stomp onboard expression pedal?

- Have you been able to get the tuner to work?

- Have you been able to get tap tempo to work?

Thanks, looking forward to your response.

[annamalay]

Redroc

Set your volume pedal in Biasfx to CC#11
Set Wha on/off in Biasfx to CC#15 found in Settings midi assign. Then you can use the switch under volume to toggle wha.
Tap tempo does not work Stomp uses SysEx and not CC.

There is an issue trying to engage the hold on button 3 CC (32). It doesn’t work first up in other effects.

The work round is to use AmpliTube and turn on tuner using hold+Button 3. Close AmpliTube and the it works in BiAS FX, JamUp etc. Don’t forget to set the tuner to CC32 in those apps.

[hermybear2002]

The product overall is a win, except I can't use it. I am a 'must have' tap tempo integration as I use a lot of multi-layered delays and modulation. To bad you had to use SysEx instead of CC. You would have sold a million of these regardless of the software used. Anyway, still a great product.

[Peter_IK]

Redroc

Set your volume pedal in Biasfx to CC#11
Set Wha on/off in Biasfx to CC#15 found in Settings midi assign. Then you can use the switch under volume to toggle wha.
Tap tempo does not work Stomp uses SysEx and not CC.

There is an issue trying to engage the hold on button 3 CC (32). It doesn’t work first up in other effects.

The work round is to use AmpliTube and turn on tuner using hold+Button 3. Close AmpliTube and the it works in BiAS FX, JamUp etc. Don’t forget to set the tuner to CC32 in those apps.

Have you reported these issues to IK Support? I'm sure they can assist and if there truly is an issue they will report the proper details to the devs

[Peter_IK]

Also, iRig Stomp I/O does use CC as per the product page and AmpliTube's MIDI control includes CC... Please see the following, and report any issues to IK Support.

iRig Stomp I/O can be used without a device as a stand-alone MIDI foot controller that can be integrated with regular hardware rigs and used to control outboard processors that accept MIDI patch change and continuous controls.

[axemanchris]

My workaround for the tuner was even simpler.

I set it to use button #4. It works no problem and I don’t use tap tempo anyways.

Chris

[annamalay]

Redroc

Set your volume pedal in Biasfx to CC#11
Set Wha on/off in Biasfx to CC#15 found in Settings midi assign. Then you can use the switch under volume to toggle wha.
Tap tempo does not work Stomp uses SysEx and not CC.

There is an issue trying to engage the hold on button 3 CC (32). It doesn’t work first up in other effects.

The work round is to use AmpliTube and turn on tuner using hold+Button 3. Close AmpliTube and the it works in BiAS FX, JamUp etc. Don’t forget to set the tuner to CC32 in those apps.

Have you reported these issues to IK Support? I'm sure they can assist and if there truly is an issue they will report the proper details to the devs

Peter
Apologies for not responding back as I’d missed this message.

They had provided a new connector cable which works well.

Thanks you for your advice.

[kdangelo22]

Chris, I'm using ToneStack and also trying to assign the tuner to button 4. Unfortunately, it's not working. Button 4 is CC 23 right?

[Tpstreet]

So I have an IPad 7, downloaded Amplitube for IPad. It doesn't control my presets or switch from preset to stomp, but I can hear sounds. My IPhone 6 worked. I reported it, IK said hold the 1st switch down, and unplug power and plugging back in. No change, and no other advice to get it to work. Help?

[Peter_IK]

So I have an IPad 7, downloaded Amplitube for IPad. It doesn't control my presets or switch from preset to stomp, but I can hear sounds. My IPhone 6 worked. I reported it, IK said hold the 1st switch down, and unplug power and plugging back in. No change, and no other advice to get it to work. Help?

Please reply to them in your ticket to let them know that didn't work and they will continue to assist you and resolve your issue.