iRig Pro DUO clipping

[jimmydormire]

I can only barely crack the gain on and it seems to clip especially with an electric guitar straight in. I hate to have to keep turning the pickups down to at least half way to get a clean recording signal. By turning pickups down you lose tonality... Usually use a PRS guitar but even a Telecaster will clip the DUO.... Overall it's a tone suppressor to have such a wee bit of signal hitting the pre and coming out of pre...

[Peter_IK]

That's not the expected behavior, it should work very well for guitar input of all types. Please open a ticket with IK Support at http://www.ikmultimedia.com/contact-sup ... -hardware/ and they will troubleshoot with you and assist you directly to resolve your issue.

[efflux]

This is similar to mine. Gain has to be turned full down on any guitar or line level. A straight guitar will clip for sure even when the gain is fully turned down. So will a normal level line input. A guitar with high output pickups has to be dramatically turned down to stop clipping.

[Peter_IK]

This is similar to mine. Gain has to be turned full down on any guitar or line level. A straight guitar will clip for sure even when the gain is fully turned down. So will a normal level line input. A guitar with high output pickups has to be dramatically turned down to stop clipping.

That doesn't sound like normal/expected behavior. I would suggest also opening a ticket at the link in my previous post if you have not done so already.

[WS1703620]

Did you get it sorted? Mine does the same thing. Clipping even when the gain is all the way down.