ToneX Pedal Global Tap Tempo not working

[esamismavale]

Hello.

I'm trying to set the double external switch to control the global Tap Tempo.

It switches on and off the tuner and it sets the tap tempo, but the tap tempo only works for the active preset.

I've set the BPM mode to global and

Thank you

[Roman_Kharitonov]

Same problem with global tempo. Tempo turns 120bpm after switching one preset to another. Its very uncomfortable for live performance. Bugfix needed!

[Peter_IK]

There was an update today which addressed Global Tap Tempo, you may want to update.

[Roman_Kharitonov]

Thank you Peter! This is a very good news!)

[Peter_IK]

Thank you Peter! This is a very good news!)

Please let me know if your issue was resolved with today's update. Hoping for good news.

Note that you'll want to update the TONEX software and then update your firmware from within the TONEX software but it sounds like you're already familiar with the process. But I wanted to make sure there were no "loose ends", better safe than sorry and all that

[esamismavale]

Very good news.

Thank you.

I'll try as soon as possible and will tell here.

[esamismavale]

Updating ToneX Max.

[esamismavale]

Done.

It... WORKS!

Very important for me.

Thank you very much for acting that fast. I'm very impressed.

[ilchri75]

Could you please let me know wich version of firmware let the global tap tempo works?
I installed the 1.5.11 but when I beat a tempo all presets receive the new tempo, but using 2 presets A and B both with a mono delay 1/4 as timesign, I beat the tempo, for example 190 bpm, using preset A, it works, when I switch to preset B, the bpm in the menu is the new, but if i play is 120 bpm (the default one), also if I turn back to the preset A the bpm still 120 but in the menu (entering with hold press SETUP) the bpm say 190!!!

Could someone help me?

I tried to give the tap tempo with an external switch, with a midi pedalboard and also with the tonex pedal, no way to let work the global tap tempo

Thanks in advance

Christian