Axe I/O and Amplitube 5 headphones

Discussion about IK monitors and speakers like iLoud Precison, iLoud MTM, iLoud Micro Monitor and iLoud as well as X-MONITOR software.

Axe I/O and Amplitube 5 headphones

Postby deansandland98@sky.com » Wed Nov 29, 2023 11:41 am

Hi, can anybody help me I have recently purchased axe I/O and Amplitube 5 se download came with the interface.Its all setup downloaded etc so i plugged my headphones in and i can hear my guitar through the Interface. When i start Amplitube 5 I can still hear my guitar through the interface and I’m getting an input output signal in the bottom left/right corners on the Amplitube 5 screen but not the processed sound from Amplitube amps pedals cabs nothing I have set input output to axe I/O and tried all channels I have checked nothing is muted on the axe control panel and still nothing just guitar through interface no Amplitube 5 sounds.I am using a Mac and went into sound settings and selected axe I/o as input output.Now I don’t have any speakers plugged into the interface could that be why the headphones are not working? Any help would be greatly appreciated
Thanks Dean.

I have emailed Ik multimedia but thought I would also try the forum.
deansandland98@sky.com
 
Posts: 1
Joined: Tue Nov 28, 2023 8:56 pm

Re: Axe I/O and Amplitube 5 headphones

Postby Zeppelin17 » Tue Dec 12, 2023 8:18 pm

Have you turned the "Monitor" knob on the Axe? There's a knob on it, with "Monitor" on top, "Direct" on the left and "DAW" on the right. Try turning it and see if it works. I had the same issue as you on the first time trying it, and this solved it for me.
Zeppelin17
 
Posts: 4
Joined: Mon Apr 24, 2023 7:50 pm

Re: Axe I/O and Amplitube 5 headphones

Postby miaoklo » Mon Dec 25, 2023 2:34 am

Check to check if it functions by turning it. When I first tried it, I experienced the same problem that you did, but this worked for me.
spacebar clicker
miaoklo
 
Posts: 2
Joined: Mon Dec 25, 2023 2:33 am

Re: Axe I/O and Amplitube 5 headphones

Postby buntpath » Mon Jan 15, 2024 10:33 am

Zeppelin17 wrote:Have you turned the "Monitor" knob on the Axe? There's a knob on it, with "Monitor" on top, "Direct" on the left and "DAW" on the right. Try turning it and see if it works. I had the same issue as you on the first time trying it, and this solved it for me.

That's right, just rotate it and it will work normally
buntpath
 
Posts: 3
Joined: Mon Dec 25, 2023 9:51 am


Return to IK Monitors and Speakers