Tonex Pedal - How to switch sampling frequency?

[Smaxo303]

Hi,
how can I switch from 41,1 kHz to 48 kHz with the ASIO driver from the Tonex pedal?
I can't find a way with the TONEX Pedal ASIO Driver 5.5.0.

I can only switch between 16 bit | 44100 Hz and 24 bit | 44100 Hz with the Windows 11 driver.

Tonex pedal specification:
-> USB-Interface with 24 Bit / 96 kHz ???

Thx for any help!

[darkogav]

IIRC it only supports 44.1

[Smaxo303]

IIRC it only supports 44.1

Thanks for the reply.

That is strange, because of the good overall specifications of the hardware.
I made a ticket for the support.
If they don't have a proper driver support for ASIO and WDM, than the interface feature makes no sense to me.
I don't need 96 kHz but 48 kHz (Nyquist: <24 kHz) is a normal setting for audio recording.

Also the WDM driver is not supported from Windows. I can't use the control (mute, volume). it's always 100 % volume in every software application.
It shocks my ears at the first time

[darkogav]

I dont own the pedal but saw it in manual.

let us know what support reply is. i might be wrong.

[Smaxo303]

Okay, I'll well do. I check the manual again.

[Smaxo303]

Ah, I found it in the website and on sweet water, not in the manual.
https://www.ikmultimedia.com/products/tonexpedal/#specs

I bought it from Thomann and it says USB audio interface with 24 bit / 96 kHz.
Frequency response 5 Hz to 24 kHz and 24 bit / 192 kHz ADC, but no 48 kHz support. ???