Can't hear anything

AmpliTube TONEX, AmpliTube 5, AmpliTube Custom Shop, AmpliTube Joe Satriani, AmpliTube Brian May, MESA/Boogie®,Orange™, Fender™, Hendrix™, Metal, AmpliTube SVX, and more for Mac/PC

Can't hear anything

Postby pacifica1985 » Thu May 19, 2022 2:26 pm

Hello.
I'm using AmpliTube 5 on macOS Monterey and I can't hear anything. Is this app compatible with macOS Monterey?
pacifica1985
 
Posts: 3
Joined: Thu May 19, 2022 2:18 pm

Re: Can't hear anything

Postby garfy » Fri May 20, 2022 2:13 pm

Hello pacifica1985 and welcome to the forums.

AT5 should work on Monterey, although if you are on a M1 processor this will be via Rosetta 2.

Make sure you have given the OS permission to use AT5 under System Preferences>Security and Privacy>Privacy>Microphone.

Hope that helps.
System Specs: 2012 Mac Mini 2.6 i7 & 2015 MBP 2.2 i7, 16GB RAM
macOS10.15.7 Logic 10.6.1 Reason 11
Various IK, NI, Waves, Softube, Eventide, XLN software
Focusrite 18i20 x 2, Novation ReMote 25SL
garfy
Moderator
 
Posts: 2132
Joined: Thu Oct 20, 2011 6:09 pm
Location: Comfy chair, UK

Re: Can't hear anything

Postby pacifica1985 » Fri May 20, 2022 6:06 pm

It must be something else because I have intel chip and full permission to use mic.
pacifica1985
 
Posts: 3
Joined: Thu May 19, 2022 2:18 pm

Re: Can't hear anything

Postby garfy » Fri May 20, 2022 6:10 pm

Ok, well that's the obvious one to check on a Mac.

So, will need a bit more information about your system and what you've done so far.

1) what audio interface are you using?
2) have you checked that this AI is selected in the AudioMIDI setup in AT5?
3) can you see a signal coming into and going out of the AT5 GUI even if you can't hear it?
4) how are you monitoring the audio - headphones or speakers.

What else have you done to fault find the problem?
System Specs: 2012 Mac Mini 2.6 i7 & 2015 MBP 2.2 i7, 16GB RAM
macOS10.15.7 Logic 10.6.1 Reason 11
Various IK, NI, Waves, Softube, Eventide, XLN software
Focusrite 18i20 x 2, Novation ReMote 25SL
garfy
Moderator
 
Posts: 2132
Joined: Thu Oct 20, 2011 6:09 pm
Location: Comfy chair, UK

Re: Can't hear anything

Postby pacifica1985 » Fri May 20, 2022 7:41 pm

I am using AmpliTube 5 as standalone app.
I use M-TRACK SOLO audio card and selected it as input. Also I use built-in audio output (headphones).I also used the sound card as output but no change. When I start the app I can only hear that it is on ( some kind of microphonic sound).When I play the guitar the signal is not detected.
Thanks
pacifica1985
 
Posts: 3
Joined: Thu May 19, 2022 2:18 pm

Re: Can't hear anything

Postby garfy » Fri May 20, 2022 10:37 pm

That interface is designed to use input 2 as the instrument input, so make sure that’s where your guitar is connected to, the instrument is selected with the switch and you have selected input 2 as the left input in the AudioMidi settings in AT5.

You will also need USB selected on the front Output switch.

Hope that helps.
System Specs: 2012 Mac Mini 2.6 i7 & 2015 MBP 2.2 i7, 16GB RAM
macOS10.15.7 Logic 10.6.1 Reason 11
Various IK, NI, Waves, Softube, Eventide, XLN software
Focusrite 18i20 x 2, Novation ReMote 25SL
garfy
Moderator
 
Posts: 2132
Joined: Thu Oct 20, 2011 6:09 pm
Location: Comfy chair, UK


Return to AmpliTube Guitar Amp & FX modeling