ARC System 3 / blank GUI in Studio One 3.5

[roosterbooster19]

I tried the demo and got a blank GUI in Studio One 3.5 on 2 machines, it worked in Reaper trial.
Any ideas?

I hope to get a fix and another trial for Studio One.

Thanks in advance,

[DarkStar]

I am sorry to hear about the problems you are running into.

As this is primarily a user to user forum, someone-else may chime in [#]. Meanwhile, the best thing to do is check the FAQs, via here. If they do not resolve the issue, there is a link at the top to the Technical Support form, for some one to one investigation and help. Response time is usually within 2 working days (US (East Coast) Business hours, generally), but in the current circumstances please allow some more time.

[#] But please remember that the same symptoms do not necessarily mean the same problem.

And, to help others who run into a similar problem, please let us know what you did to resolve the problem, but without directly quoting any correspondence from Support.

[roosterbooster19]

I couldn't find a way to edit the first post. It's just happening on the notebook.

[roosterbooster19]

Just realised that the VST2 is not available in Studio One 3.5.6.46910 Windows 10 X64.
I now have the full version of ARC 3 and still experience no GUI in Studio One on a Lenovo ThinkPad T420.

I'm going to try JBridge with the VST2. I report back here.

[roosterbooster19]

Just realised that the VST2 is not available in Studio One 3.5.6.46910 Windows 10 X64.
I now have the full version of ARC 3 and still experience no GUI in Studio One on a Lenovo ThinkPad T420.

I'm going to try JBridge with the VST2. I report back here.

It looks like the issue is OS or DAW.
VST2 now appears with Jbridge and GUI working in S1.