AXE I/O Solo setup problem [Resolved]

AXE I/O, AXE I/O Solo, iRig Stomp I/O, Guitar and Bass Audio Interfaces/Controllers, iRig Keys I/O and the iRig Keys family of MIDI controllers

AXE I/O Solo setup problem [Resolved]

Postby wheresmymind » Thu Oct 15, 2020 5:03 am

My Axe i/o solo connects to a USB hub which is powered by my Macbook power supply (29w - Output: 14.5v 2.0A or 5.2v 2.4A). The hub is then connected to my Macbook (Only 1 USB C on Macbook). I did install the Axe solo Control Panel and Product Manager and registered.

My problem is my AXE won't connect to my Macbook. The USB led won't turn on and "no axe i/o found" in FIRMWARE UPDATER. But I can hear the guitar from the headphone output. :shock: :shock: :shock:
wheresmymind
 
Posts: 4
Joined: Wed Oct 14, 2020 11:27 pm

Re: AXE I/O Solo setup problem

Postby DarkStar » Thu Oct 15, 2020 2:24 pm

Hello and welcome to the forum.

I am sorry to hear about the problems you are running into.

As this is primarily a user to user forum, someone-else may chime in [#]. Meanwhile, the best thing to do is check the FAQs, via here. If they do not resolve the issue, there is a link at the top to the Technical Support form, for some one to one investigation and help. Response time is usually within 2 working days (US (East Coast) Business hours, generally), but in the current circumstances please allow some more time.

[#] But please remember that the same symptoms do not necessarily mean the same problem.

And, to help others who run into a similar problem, please let us know what you did to resolve the problem, but without directly quoting any correspondence from Support.

--------------------
PS: it would be best to change your Account Name away from an email address, to minimise the chance of it being harvested by web bots and you receiving all sorts of 'special offers', bank account verification requests, Amazon Prime renewals, Ray-ban sunglasses, tax refunds etc from all over the place for years and years. You can change it here:.
----------------
DarkStar ... interesting, if true.
Inspired by ...
User avatar
DarkStar
Hero Of The Week (Moderator)
 
Posts: 8722
Joined: Fri Dec 17, 2010 5:42 pm
Location: Surrey, UK

Re: AXE I/O Solo setup problem

Postby wheresmymind » Sat Oct 17, 2020 7:15 pm

Its working now. The problem was the usb3 hub not backward compatible with usb2
wheresmymind
 
Posts: 4
Joined: Wed Oct 14, 2020 11:27 pm

Re: AXE I/O Solo setup problem [Resolved]

Postby DarkStar » Mon Oct 19, 2020 1:22 pm

Good oh. :) I thought that all USB3 devices were USB2-compatible.

------------------------------
As this thread has been resolved for the original poster it will be marked as such and locked to keep the forum tidy.
  • If you are the original poster and wish to add a comment please ask a Moderator to unlock the thread.
  • If you are reading this thread because you are having similar issues or have questions of a related nature, please feel free to start a new topic.
  • Remember that similar symptoms do not mean the same problem or solution.
----------------
DarkStar ... interesting, if true.
Inspired by ...
User avatar
DarkStar
Hero Of The Week (Moderator)
 
Posts: 8722
Joined: Fri Dec 17, 2010 5:42 pm
Location: Surrey, UK


Return to Interfaces & Controllers