AXE IO Question - Processed Sound Through Amp Out

[ddub2306]

Can I choose to send a processed Amplitube signal instead of a clean DI signal to my amp using the amp out on the Axe IO? I would like to hear the Amplitube effects through the amp in real time.

Does the monitor knob control the output from the amp out or does it just control the monitor and headphone outputs?

I know that the iRig HD 2 has this option with the Thru/FX switch, but I haven't been able to find info on this for the Axe IO.

[ggcarlos]

Same question no one answer:(

Pleas help !!!

[DarkStar]

As this is primarily a user to user forum, and no-one else has chimed in, the best thing to do is check the FAQs, via here. If they do not resolve the issue, there is a link to the Technical Support form, for some one to one investigation and help. Response time is usually within 2 working days (US (East Coast) Business hours, generally), but in the current circumstances please allow some more time.

And, to help others who run into a similar problem, please let us know what you did to resolve the problem, but without directly quoting any correspondence from Support.

[dlgebert]

Same question

Ryan from IKM created a good FAQ on how to do this.

Settings page with AMP OUT sending the signal from AmpliTube into your amplifier.



Important: In the AXE I/O control panel you can send your inputs directly to the re-amp out. Make sure this is not enabled. This will be a dry unprocessed signal.

This is a link to the AXE I/O FAQ:

https://www.ikmultimedia.com/faq/index.php?category=13&topic=axe-io

Dave