AXE I/O help what am I doing wrong

AXE I/O, AXE I/O Solo, iRig Stomp I/O, Guitar and Bass Audio Interfaces/Controllers, iRig Keys I/O and the iRig Keys family of MIDI controllers

AXE I/O help what am I doing wrong

Postby Ron Reilly » Wed Apr 22, 2020 5:05 pm

Just got my axe i/o yesterday 4/21. Logged onto ik registered, downloaded and authorized all my products and drivers. restarted computer, pulled up Amplitube Max set audio setting, I get a signal in Amplitube Max but it’s only clean guitar sound? I can pick a metal preset, still only get a clean guitar? This happens with other plugins I have, what the hell am I doing wrong? New MacBook, brand new axe I/o, Adams monitors. Had a Focusrite Scarlett solo 3rd gen that I smashed because it was garbage. Now I just get the axe I/o and all I get is clean guitar thru everything. How can this be
Ron Reilly
 
Posts: 1
Joined: Wed Apr 22, 2020 12:33 am

Re: AXE I/O help what am I doing wrong

Postby Peter_IK » Wed Apr 22, 2020 10:41 pm

Make sure you have the Monitor knob set correctly (all the way to "DAW" if you want to only hear the affected signal, which is the way most would have it under your circumstances/needs).
IK Multimedia. Musicians First.
YouTube - Facebook - Twitter
Need help? Our support team will be happy to help and can be reached at this link.
From the rules: Moderator decisions are not a matter for forum discussion and are final.
User avatar
Peter_IK
Kingpin
 
Posts: 20325
Joined: Thu Nov 18, 2010 3:40 pm
Location: Everywhere

Re: AXE I/O help what am I doing wrong

Postby bhogin » Fri May 08, 2020 3:13 am

I too am having this problem! Were you able to fix?
bhogin
 
Posts: 2
Joined: Fri Nov 22, 2019 6:16 am

Re: AXE I/O help what am I doing wrong

Postby dlgebert » Fri May 08, 2020 4:39 am

bhogin wrote:I too am having this problem! Were you able to fix?


Peter_IK wrote:Make sure you have the Monitor knob set correctly (all the way to "DAW" if you want to only hear the affected signal, which is the way most would have it under your circumstances/needs).


I assume Ron followed what Peter asked him to do since he didn't reply back. Pasted below is from one of my past posts:

dlgebert wrote:The next thing to check is how the physical [ MONITOR] knob is set. The knob is on the right side the AXE I/O next to the [HEADPHONE] knob. Make sure it is turned all the way to the right, pointing to [DAW]. Whether you are using a DAW or the standalone Amplitube application, it needs to be turned all the way to the right to hear just the signal processed thru the Amplitube standalone application or the plugin inside your DAW.


This is not a "fix", but the way to hear just the processed signal.

Dave
User avatar
dlgebert
 
Posts: 371
Joined: Sun Dec 01, 2013 11:51 pm

Re: AXE I/O help what am I doing wrong

Postby bhogin » Fri May 08, 2020 5:26 am

Dave,

Bingo, I had the monitor knob right but the audio settings in Amplitube were all sorts of jacked up. Got it figured out now, thanks.
bhogin
 
Posts: 2
Joined: Fri Nov 22, 2019 6:16 am

Re: AXE I/O help what am I doing wrong

Postby Boomer01! » Tue May 12, 2020 9:11 pm

I am having the same issue- my monitor is turned to the DAW side of things still clean sounds - when trying to use in standalone. I use Logic Pro x and the interface works properly in the DAW and I can access the other plugins and features in the DAW but can't seem to get AmpliTube into. Logic Pro...tips or thoughts anyone ??
Boomer01!
 
Posts: 1
Joined: Tue May 12, 2020 9:05 pm

Re: AXE I/O help what am I doing wrong

Postby matthewjohnbauer » Mon May 18, 2020 10:12 pm

Peter_IK wrote:Make sure you have the Monitor knob set correctly (all the way to "DAW" if you want to only hear the affected signal, which is the way most would have it under your circumstances/needs).


THIS WORKED!! but now that i have amplitube sound. Its crackling and popping???
matthewjohnbauer
 
Posts: 4
Joined: Mon May 18, 2020 9:20 pm

Re: AXE I/O help what am I doing wrong

Postby dlgebert » Tue May 19, 2020 4:47 am

matthewjohnbauer wrote:THIS WORKED!! but now that i have amplitube sound. Its crackling and popping???


What kind of system do you have, Mac or PC? Are you using an actual DAW, or the standalone Amplitube 4 application?

If you have a PC, review this thread that is geared toward Windows:
https://cgi.ikmultimedia.com/ikforum/viewtopic.php?f=9&t=24385


This one is Mac focused:
https://cgi.ikmultimedia.com/ikforum/viewtopic.php?f=9&t=24305


AXE I/O FAQ:
https://www.ikmultimedia.com/faq/index.php?category=13&topic=axe-io

Dave
User avatar
dlgebert
 
Posts: 371
Joined: Sun Dec 01, 2013 11:51 pm

Re: AXE I/O help what am I doing wrong

Postby matthewjohnbauer » Tue May 19, 2020 6:32 am

It definitely has to do with my buffer setting. Just need to close background apps and set properly.

dlgebert wrote:
matthewjohnbauer wrote:THIS WORKED!! but now that i have amplitube sound. Its crackling and popping???


What kind of system do you have, Mac or PC? Are you using an actual DAW, or the standalone Amplitube 4 application?

If you have a PC, review this thread that is geared toward Windows:
https://cgi.ikmultimedia.com/ikforum/viewtopic.php?f=9&t=24385


This one is Mac focused:
https://cgi.ikmultimedia.com/ikforum/viewtopic.php?f=9&t=24305


AXE I/O FAQ:
https://www.ikmultimedia.com/faq/index.php?category=13&topic=axe-io

Dave
matthewjohnbauer
 
Posts: 4
Joined: Mon May 18, 2020 9:20 pm


Return to Interfaces & Controllers