ToneX doesn't get Signal from Guitar

[Dreipass1]

When Using ToneX one, plugged via USB (Mac OS Sonoma), I didn't get a Signal from the guitar within the ToneX software. I only can edit with the sound snippets (like Woody or Texture). If I change Input device within OS X system settings, the signal works, I also have a signal in Logic.

How to enable the Guitar within Tonex-Software when plugged into the ToneX One? I set the Input to Tonex One and the output to my audiointerface (but also testwise the output to Tonex One Pedal) - no signal at all. Teh signal meter in the left below corner alsway gets nothing...

I'm totally confused. Thansk for helping out.

Best Regards from Germany
Tim

[Dreipass1]

To clear things up: The pedal self works without problems. Can play, use the headphone out and can load Presets from Mac to the pedal.
Only in the TonexX-Software I didn't get a signal (the meter in the left below corner shows no signal at all). Of course I set the Tonex One as Input-Device in the Software settings...

[Dreipass1]

Problem solved: Tonex SE needs right to access the microphone in the system preferences. This obviously alse means rights for accessing the line-signal...

[tommylp]

Thanks for sharing! I had watched countless videos and setup “guides” with no luck, and the issue was what you said, that ToneX SW didn’t have access to the mic. This is for Mac users.