TONEX Pedal Footswitch issue.

[kedardesai77]

I'm having a strange issue with my brand new TONEX pedal.
The bank up and down does not work.
Either the left and middle performs a bank down
The right button goes to a present in the current bank.
I can browse the presets with the knob. The footswitches don't seem to be working properly.

Has anyone heard of this? Any help would be appreciated.

[mcase24]

Similar issue here.
Neither Bank Up/Down work, nor does the A+C to see current bank. Any attempt at either just switches to a preset within the current bank. Knob still works to cycle through, though.

[Peter_IK]

Sounds like your TONEX Pedal may have been inadvertently set to Lock Mode. Please see page 16 of the TONEX Pedal User Manual for more information about Lock Mode.

If this does not help fix your issue please reach out to IK Support via https://www.ikmultimedia.com/contact-support/hw

Thank you.

[mcase24]

Confirmed that lock mode is not engaged. Customer support has now been contacted.
Thank you!

[mcase24]

Update: After some steps taken requested by support, the pedal is being replaced.

[paulwareing]

I have the same issue if I set the switch mode to 'press'. If I set to the default, 'release', bank up and down with A+B or B+C work ok.

[pbruynooghe]

I've the same issue. The A+B works only if the Global/switch is set on Release, no works when set on Press...

[lomby83]

Yep, same issue for me here. I'd quite like to have my switch mode set to "Press" but this breaks the bank up and down functionality.

[Peter_IK]

If this does not help fix your issue please reach out to IK Support via https://www.ikmultimedia.com/contact-support/hw

Thank you.

...as above, if you'd like an issue to be resolved please report it to IK Support and they will assist you. Thanks.

[jareid87]

Edited: Press vs Release and bank up/down already mentioned as the culprit.