iLoud Micro monitor stereo problem

[riscalise]

Hi, I bought the iLoud micro monitors a week ago and I noticed that the left monitor has more volume between 1khz and 2khz than the right one.
I tried everything. I changed the cables and the position of the monitors and I get the same problem (bluetooth also).

I'm using a TASCAM M-164UF interface and a Windows 10, I5 processor, 32gbRAM.

Any ideas?


This is what I did to get a centered stereo image:

https://i.imgur.com/nXiE91Y.jpg

[Peter_IK]

Make sure the switches on the back are all set to the proper settings for your environment. If that is not the issue please contact IK Support at http://www.ikmultimedia.com/contact-support for issues of this nature. Thank you.

[peripatitis1]

Did you find a solution riscalise? I am having a very similar issue. The right channel sounds a bit muffled compared to the left one. I haven't made measured the difference butthose measurements feel they could reflect my situation well .
I wonder if it is the interconnecting cable.

[anilnc]

Hi Riscalise

Hi, I bought the iLoud micro monitors a week ago and I noticed that the left monitor has more volume between 1khz and 2khz than the right one.
I tried everything. I changed the cables and the position of the monitors and I get the same problem (bluetooth also).

I'm using a TASCAM M-164UF interface and a Windows 10, I5 processor, 32gbRAM.

Any ideas?


This is what I did to get a centered stereo image:

https://i.imgur.com/nXiE91Y.jpg

Could you please update us on this issue you had pleasE?