by smithy271278 » Fri Jul 14, 2023 4:58 pm
right folks hope this helps...
I had an old twin footswitch with led lights and for the life of I couldn't get it to work with axe I/o one. even though the manual stated that it would..
So the issue is a simple one, remove the led lights from the chain!!!!!!! that's it...
for some reason putting the signal through the small led seems to not play very nice with axe one.
you can use a latching or momentary switch as long as it has a trs (stereo) jack
if you have a latching switch set to latching in axe I/o controller and obviously if momentary etc etc
I have 2 switches to control looper and another to change effects.
cheers