I plan to put a stereo delay pedal after the ToneX.

AXE I/O, AXE I/O Solo, iRig Stomp I/O, Guitar and Bass Audio Interfaces/Controllers, iRig Keys I/O and the iRig Keys family of MIDI controllers

I plan to put a stereo delay pedal after the ToneX.

Postby Priong68 » Wed Feb 05, 2025 10:22 am

Hello,

I can't find any information about signal type and output impedance for L and R outputs on ToneX pedal in official manual.

Is it a line level signal or instrument level signal? What is the output impedance?

I plan to put a stereo delay pedal after the ToneX.
Most guitar effects pedals are expecting a high impedance instrument signal as an input to work in most optimal way. If we introduce line level signal to the guitar pedal (especially analog one) - it often produces unpleasant or compressed/distorted sounds because input signal is too hot and it exceeds the headroom.
Priong68
 
Posts: 1
Joined: Wed Feb 05, 2025 10:21 am

Re: I plan to put a stereo delay pedal after the ToneX.

Postby Peter_IK » Wed Feb 05, 2025 4:26 pm

TONEX Pedal is made to be used on a pedalboard in just such a fashion. You should get excellent results in the scenario you describe.
IK Multimedia. Musicians First.
YouTube - Facebook - Twitter
Need help? Our support team will be happy to help and can be reached at this link.
From the rules: Moderator decisions are not a matter for forum discussion and are final.
User avatar
Peter_IK
Kingpin
 
Posts: 20533
Joined: Thu Nov 18, 2010 3:40 pm
Location: Everywhere

Re: I plan to put a stereo delay pedal after the ToneX.

Postby knob4002 » Fri Feb 14, 2025 9:52 am

I'd like to get the same info about it... are the outputs LINE level or INSTRUMENT level?

Some youtubers (eg: J. Sadities) talks about LINE output and INSTRUMENT input (which is quite obvious).

But I've found some posts that report the fact that the Tonex Pedal has to be considered as a Stompbox into a chain, and it's good to go considering INSTRUMENT input AND Output.

A clear "statement" :D from IK Multimedia would be appreciated.
knob4002
 
Posts: 1
Joined: Mon Jan 13, 2025 7:24 am


Return to Interfaces & Controllers