SimoRissanen1 wrote:
After fiddling around with Mac's MIDI settings a little everything now seems to work as expected. Got the expression pedal to control a wah and Lead foot to turn some pedals on and off. Thanks for that tip!
On the expression pedal knob moving issue, there seems to be some trouble there. Two issues jump out immediately. I assigned the expression pedal to control a knob on an amp, and:
1. Moving the pedal in either direction it skips around strangely at around value 7 on the knob, basically stutters and then jumps over 7 completely.
2. The knob doesn't go all the way to 10 with the pedal all the way pressed. Only goes to 9.4.
Can see this behaviour in MidiView also, value jumps from for example 83 to 91 going up and then 84 to 77 to 72 going down, so there is 100% something weird going on there. Also only consistently gets to 119 max even though max value is set to 127 in AXE control panel.
great, it does match to this plotting, right?
It seems a generic problem then, because mine does the same.
About the max value, try to set the switch to M-AUDIO position at the bottom of the pedal. In OTHER position it doesn't reach the max and also has a little erratic movement.
