[RESOLVED] Uno Pro: CV in and out 1 and 2?

[Bergfotron]

How come there are two cv in, two gate in, two cv out and two gate out although there is only one connector of each?
Can you somehow select if the individual connectors are assigned to cv or gate?

[rsaintj]

Their use is programmed by the choices made in the mod matrix. But if you’re using them to send or receive sync (Setup > Sync > Send or Receive > Sync), it will use both ports (In for Receive, Out for Send), one for clock and one for gate.

[Bergfotron]

Their use is programmed by the choices made in the mod matrix. But if you’re using them to send or receive sync (Setup > Sync > Send or Receive > Sync), it will use both ports (In for Receive, Out for Send), one for clock and one for gate.

Thanks for your reply. I have the synth now, so I can test the functionality.

[Drumkatman7]

I am having no luck using the CV connections with my O-Coast and Strega...tried using different power supplies with no luck.
Any ideas anybody ?

[Peter_IK]

Sorry to hear. Have you reported the issues you are having to IK Support? I'm sure they can help suss out what's going on.

[Drumkatman7]

Problem resolved...user malfunction...lol.
Thanks for the response.

[Peter_IK]

Great to hear it is all figured out! As this thread has been resolved for the original poster it will be marked as such and locked to keep the forum tidy.

• If you are the original poster and wish to add a comment please ask a Moderator to unlock the thread.
• If you are reading this thread because you are having similar issues or have questions of a related nature, please feel free to start a new topic. Remember that similar symptoms do not mean the same problem or solution.