iLoud Micro Speakers Channel Issue?

Discussion about IK monitors and speakers like iLoud Precison, iLoud MTM, iLoud Micro Monitor and iLoud as well as X-MONITOR software.

iLoud Micro Speakers Channel Issue?

Postby Mitchhui12 » Thu Mar 02, 2023 5:56 am

Yesterday, I received my iLoud Micro speaker set and connected them to my PC and MacBook Pro. However, I noticed that when any device is connected via 3.5mm to RCA, the channels are reversed. The speakers are on the correct sides with the red connection going to red and white to white. On the other hand, when devices are connected to the 3.5mm input, they output to the correct left/right channels. I have tried using a different RCA to 3.5mm cable and changed devices, but the issue persists only when connected to RCA. Is my unit defective? Before exchanging it at the store, I would like to confirm if this is a common problem.
Posts: 4
Joined: Tue Feb 14, 2023 8:14 am

Re: iLoud Micro Speakers Channel Issue?

Postby Peter_IK » Thu Mar 02, 2023 4:15 pm

Did you try a different cable? I'd bet that the cable is the issue rather than the speakers. Best would be to report any issue like this to IK Support and they can troubleshoot directly with you and assist you

Thank you.
IK Multimedia. Musicians First.
YouTube - Facebook - Twitter
Need help? Our support team will be happy to help and can be reached at this link.
From the rules: Moderator decisions are not a matter for forum discussion and are final.
User avatar
Posts: 19894
Joined: Thu Nov 18, 2010 3:40 pm
Location: Everywhere

Return to IK Monitors and Speakers