# SampleTank 4 Macro Dials Resetting

**URL:** <https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50>\
**Category:** Instruments\
**Tags:** support\
**Created:** [April 8, 2026, 9:10pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50 "2026-04-08T21:10:52Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![thedss](https://avatars.discourse-cdn.com/v4/letter/t/f4b2a3/32.png) [@thedss](https://forum.ikmultimedia.com/u/thedss)\
**Post date:** [April 8, 2026, 9:10pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/1 "2026-04-08T21:10:52Z")

</div>

I am using SampleTank 4 and the Flute instrument inside of FL Studio 25 and randomly when opening the session the macro dials are all set back to zero. Sometimes it does and sometimes it doesn’t, I haven’t noticed a pattern yet.

 ![Screenshot 2026-04-01 140858](https://canada1.discourse-cdn.com/flex034/uploads/ikmultimedia/original/1X/82bdd49737a79c13b880f2c9f5b9b75681d7de54.jpeg)

---

<div class="post-metadata">

**Author:** ![Peter-IK](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.ikmultimedia.com/peter-ik/32/39_2.png) [@Peter-IK](https://forum.ikmultimedia.com/u/Peter-IK)\
**Post date:** [April 8, 2026, 9:17pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/2 "2026-04-08T21:17:42Z")

</div>

Hi @thedss and welcome to the new IK Forum! Have you also reported this to IK Support via [IK Support Link - Software](https://www.ikmultimedia.com/contact-support/sw) ?

Note that this new iteration of the forum is still not a medium for direct technical support, though you are of course welcome to have other users chime in, verify, suggest, etc. But to get an issue fixed officially please do also report it to IK Support via the link above. Thanks and again, welcome!

Oh, also I have not experienced this but I do not use FL Studio so it may be something specific there or something else that isn’t “tickled” on my system but happens for you and others. I hope it works smoothly for you soon.

---

<div class="post-metadata">

**Author:** ![thedss](https://avatars.discourse-cdn.com/v4/letter/t/f4b2a3/32.png) [@thedss](https://forum.ikmultimedia.com/u/thedss)\
**Post date:** [April 8, 2026, 9:56pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/3 "2026-04-08T21:56:55Z")

</div>

Thank you for the quick reply. I will report this via the support link too; I initially was just kinda hoping it was a known thing and something a forum would resolve but it’s not a problem I will report it.

I will over the next few sessions try to notice at least some form of pattern before reporting officially though.

---

<div class="post-metadata">

**Author:** ![Peter-IK](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.ikmultimedia.com/peter-ik/32/39_2.png) [@Peter-IK](https://forum.ikmultimedia.com/u/Peter-IK)\
**Post date:** [April 8, 2026, 9:58pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/4 "2026-04-08T21:58:35Z")

</div>

Well you have one of the newest and earliest actual posts on the forum so users should see it. @Everybody - help out if you use FL Studio 25 or have experienced this issue!

---

<div class="post-metadata">

**Author:** ![Pilot-Error](https://avatars.discourse-cdn.com/v4/letter/p/85f322/32.png) [@Pilot-Error](https://forum.ikmultimedia.com/u/Pilot-Error)\
**Post date:** [April 10, 2026, 7:25pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/5 "2026-04-10T19:25:07Z")

</div>

I have the same issue here with Samplitude Pro X8 on Win 10. Macros resetting no rhyme or reason. I have contacted support. Hopefully a fix is available.

---

<div class="post-metadata">

**Author:** ![Pilot-Error](https://avatars.discourse-cdn.com/v4/letter/p/85f322/32.png) [@Pilot-Error](https://forum.ikmultimedia.com/u/Pilot-Error)\
**Post date:** [April 12, 2026, 3:09pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/6 "2026-04-12T15:09:14Z")

</div>

I was doing a bit of testing with this issue and found out all instruments with the extension st3i are affected, st4i files are fine here. Also the macros only get reset to zero when the daw gets shut down, if a project is just closed and reopened, it is fine. All instruments that are used outside of Sampletank have no macro issues.

---

<div class="post-metadata">

**Author:** ![thedss](https://avatars.discourse-cdn.com/v4/letter/t/f4b2a3/32.png) [@thedss](https://forum.ikmultimedia.com/u/thedss)\
**Post date:** [April 12, 2026, 10:03pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/7 "2026-04-12T22:03:56Z")

</div>

My experience is slightly different. The instrument is a v3 instrument like you experience… well to be more accurate, a v2.5 instrument converted to the v3 but it happens to me seemingly randomly even across shutdowns.

 ![Screenshot 2026-04-12 230119](https://canada1.discourse-cdn.com/flex034/uploads/ikmultimedia/original/1X/9f7c2c9d67980b73f9d04ece46549b1d41104e3d.png)

---

<div class="post-metadata">

**Author:** ![nitrateaudio](https://yyz2.discourse-cdn.com/flex034/user_avatar/forum.ikmultimedia.com/nitrateaudio/32/505_2.png) [@nitrateaudio](https://forum.ikmultimedia.com/u/nitrateaudio)\
**Post date:** [April 17, 2026, 6:16pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/8 "2026-04-17T18:16:55Z")

</div>

> [@thedss](#):
>
> n opening the session the macro dials arhi

Hi, I am an FL User. You need to set the marcos at the setting you need in FL automation in the track in order to keep the setting. Otherwise it will reset.

hope that helps

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/ikmultimedia/original/1X/eed2f9fc1bf49f8bef77b1dfa506d723f895415e.png) [@system](https://forum.ikmultimedia.com/u/system)\
**Post date:** [April 17, 2026, 7:17pm UTC](https://forum.ikmultimedia.com/t/sampletank-4-macro-dials-resetting/50/9 "2026-04-17T19:17:23Z")

</div>

Closed on April 17, 2026, 7:17pm UTC

This topic was automatically closed 60 minutes after the last reply. New replies are no longer allowed.
